第一階段:SR-VII/Plasma Probe had marked a milestone for SPL in developing environmental tests to space payloads in the first 5-year.
- 2006: SPL startup and SPSC.
建構實驗室與規劃太空電漿模擬艙。 - 2007: SPSC and monitoring system.
組裝太空電漿模擬艙與監控設施。 - 2008: Fabrication facilities for payloads.
太空酬載製作設備。 - 2009: TCT and TVT facility.
溫度循環與熱真空測試設備。 - 2010: RF and vibration test facility.
添購射頻量測模組與振動測試設備。
第二階段:Successful scientific mission of SR-IX/Space Plasma Sensor Package had demonstrated our capability in payload fabrication in the second 5-year.
- 2011: Sensor fabrication facility.
強化探測器製作設備。 - 2012: Learning and envrtl. test facility.
提升教學與環境測試設施。 - 2013: UV plasma device and clean booth.
建造紫外光電漿產生系統與潔淨設施。 - 2014: TVT service and facility upgrade.
熱真空測試服務與系統升級。 - 2015: Next science payload missions.
準備下階段科學酬載任務。
第三階段:Successful scientific mission of FS-5/Advanced Ionospheric Probe had marked the most important step to top TRL in the third 5-year.
- 2016: Prepare CubeSat missions.
參與立方衛星科學酬載與次系統研製。 - 2017: Launch FORMOSAT-5 satellite.
發射福爾摩沙衛星五號。 - 2018: Startup Center for Astronautical Physics and Engineering (CAPE).
啟動太空科學與科技研究中心。 - 2019: Develop CubeSat subsystems.
發展立方衛星用次系統。 - 2020: Establish Department of Space Science and Engineering.
成立太空科學與工程學系。
第四階段:Successful scientific mission of PEARL-1/Compact Ionospheric Probe.
- 2021: Establish facilities for CubeSat development and operation.
建設立方衛星研製/操作環境。 - 2022: Assemble and test PEARL-1C and 1H CubeSats.
立方衛星組裝與測試。 - 2023: Launch PEARL-1C and 1H CubeSats.
發射珍珠號立方衛星。